Engineered specifically to fulfill SNiP RK thermal regulations and GOST structural strength specifications.
Designed with multi-cavity thermal break profiles and gas-filled argon spacers, delivering U-values down to 0.76 W/m²K to withstand -40°C Kazakh winter extremities.
View Product Technical SpecsIncorporates dynamic inter-story drift expansion joints and high-modulus structural sealants capable of absorbing up to 9-magnitude seismic displacement cycles.
View Product Technical SpecsCombines high-tensile stainless steel fittings with heavy-duty laminated safety glass, optimizing transparency for commercial podiums and airport terminals.
View Product Technical SpecsNext-generation solar glass cladding engineered for urban commercial towers, converting Kazakhstan's high solar radiation into renewable power.
View Product Technical SpecsXi'an Orion Architectural Glass & Window Co., Ltd. serves as a premier industrial origin for complex facade engineering across Central Asia.
End-to-end CNC fabrication lines ensuring sub-millimeter tolerances for structural curtain wall frames and glazed units.
30 dedicated quality engineers enforcing zero-defect verification across raw material intake, thermal break structural integrity, and glass pane optics.
How Orion engineered facade systems directly align with local building codes, structural loads, and severe thermal cycles.
| Engineering Parameter | Kazakhstan Building Standard (SNiP RK / GOST) | Orion Factory Customization Solution | Performance Advantage |
|---|---|---|---|
| Thermal Insulation (U-Value) | SNiP RK 2.04-03-2002: U ≤ 0.85 W/m²K (Astana Cold Zone I) | Triple Low-E glass with 34mm Technoform polyamide thermal breaks & 95% Argon fill. | Exceeds minimum code with U-values down to 0.76 W/m²K, reducing heating energy overhead by 32%. |
| Seismic Resistance | GOST 21519-2003: Zone 9 Seismic Rating (Almaty & Mountainous South) | Flexible structural silicone joints, dynamic anchor brackets, and split-mullion unitized movement joints. | Accommodates horizontal story drift up to 1/100 without glass fracture or seal degradation. |
| Wind Pressure Resistance | SNiP 2.01.07-85: High Steppe Winds (Up to 4.5 kPa gust pressure in Astana) | Heavy-duty 6063-T6 aluminum profiles with wall thickness up to 3.0mm & internal steel reinforcement. | Tested structural deflection limit exceeding 5.0 kPa, preventing frame deformation under storm conditions. |
| Corrosion Resistance | EAEU Salt/Alkaline Environmental Protection Standards | AkzoNobel/PPG fluorocarbon (PVDF) 3-coat finish & 1000-hour salt spray tested hardware. | Resists severe chalking, fading, and chemical deterioration in saline soil and steppe dust exposure. |
| Acoustic Isolation | GOST 23337-2014 Urban Acoustic Comfort Thresholds | Asymmetric glass lamination (e.g., 8mm + 1.52PVB + 6mm) paired with multi-chamber gaskets. | Achieves sound transmission loss (Rw) of up to 48 dB, isolating interior spaces from city noise. |
Located in Xi'an—the direct starting hub of the Silk Road Railway Corridor—Orion offers unmatched land freight delivery speeds to Kazakhstan.
Direct dispatch from Xi'an International Port to Almaty, Astana, and Shymkent via Horgos / Dostyk land ports. Transit times reduced to just 7–10 days compared to 35+ days via sea routes.
All manufactured glass units, aluminum extrusions, and hardware components come fully documented with Eurasian Economic Union (EAC) compliance paperwork to streamline border clearance.
Our 36-engineer R&D division provides complete shop drawings, structural calculation books, and remote or on-site installation supervision for Kazakh project contractors.
Customized curtain wall configurations designed for diverse regional climates and architectural requirements.
High-altitude wind and severe frost resistant unitized glass facades equipped with warm-edge spacers, solar-control Low-E coatings, and heated condensation-prevention channels.
Flexible structural silicon glazing and semi-unitized stick systems engineered to flex safely during high-magnitude seismic events while maintaining complete air/water tightness.
High-light-transmittance dynamic spider glass facades and sun-shading louver assemblies optimized for intense summer radiation and extreme daytime temperature swings.
Explore our extended portfolio engineered for extreme climate performance, architectural landmarks, and specialized industrial facilities.
Features an integrated active air cavity that cushions severe external wind pressures and creates a thermal buffer zone against sub-zero Kazakh winter air.
View Product Technical SpecsCustom 3D CNC-bent aluminum profiles and cold-bent laminated tempered glass units created for signature cultural and high-tech corporate headquarters.
View Product Technical SpecsUtilizes steel-reinforced composite fire-rated aluminum extrusions and EI-60/EI-120 certified ceramic insulated glass to prevent fire propagation.
View Product Technical SpecsEngineered with multi-layer acoustic PVB interlayers and sound-dampening profile cavities, specifically built for urban arterial developments in Almaty.
View Product Technical SpecsElectronically tintable glass panels that automatically adjust solar heat gain (SHGC) based on real-time Kazakh solar glare, drastically lowering HVAC loads.
View Product Technical SpecsNatural clay tiles combined with heavy insulation backing, offering severe frost-thaw cycle resistance and authentic regional architectural aesthetics.
View Product Technical SpecsLightweight yet exceptionally rigid composite panels designed for large-format industrial parks, logistics hubs, and airport hangers across Kazakhstan.
View Product Technical SpecsSmart building system equipped with concealed chain actuators and weather sensors, ensuring automated structural ventilation and thermal comfort.
View Product Technical SpecsClear answers regarding GOST standard compliance, logistics, customs clearance, and thermal design for Kazakh procurement managers.
Orion Window & Door