Architectural motorized fenestration custom-engineered to meet stringent Swiss SIA building codes, airtightness demands, and structural acoustic attenuation requirements.
Engineered for high thermal resistance (Uw ≤ 0.85 W/m²K) in line with Minergie-P building envelopes in commercial and mixed-use districts.
Featuring 32mm ultra-narrow aluminum profiles designed for unobstructed river vistas, high wind load resistance (Class C4/B4), and salt-spray durability.
Vertical telescopic movement enabling flush indoor-outdoor transition for hospitality, dining terraces, and corporate atrium presentation spaces.
Custom-calibrated airtight pressurized sealing designed for research facilities, bio-corridors, and sterile logistics access in Greater Basel tech parks.
Strategic analysis of building automation, environmental regulations, and architectural envelopes in Switzerland's tri-border innovation capital.
Basel-Stadt leads Switzerland in ambitious net-zero targets and energy codes. Electric lifting windows must satisfy extreme thermal envelope demands with thermal bridge optimization, argon/krypton filled insulated glass units (IGU), warm-edge spacers, and verified airtightness values under Swiss SIA standard 180 and SIA 380/1.
Home to global healthcare titans (Novartis, Roche) and surrounding biotech incubators in Allschwil and Muttenz, Basel corporate properties demand advanced building envelope integrations where motorized window systems tie effortlessly into KNX, BACnet, and central SCADA climate management networks.
Re-developing heritage riverbank buildings alongside modern glass facades in Basel requires micro-frame sightlines, custom RAL polyester powder coatings matching cantonal preservation guidelines, and invisible internal counterweight motor assemblies that preserve external elevation aesthetics.
Our direct-factory fabrication workflow combines structural 6063-T6 aluminum alloys, precision servo drives, and multi-tier mechanical fail-safe systems.
| Performance Parameter | Xi'an Orion Technical Benchmark | Standard Market Alternative | Swiss & European Standard Compliance |
|---|---|---|---|
| Thermal Transmittance (Uw) | 0.78 – 1.1 W/(m²·K) with Triple Silver Low-E Glass | 1.6 – 2.4 W/(m²·K) Double Glazed | EN ISO 10077-1 / SIA 380/1 Compliant |
| Air Permeability & Airtightness | Class 4 (600 Pa test pressure) with multi-fin co-extruded EPDM | Class 2 or 3 (300 Pa) | EN 12207 / SIA 180 Certified |
| Water Tightness Under Wind Load | Class 9A (600 Pa) / E750 Custom Marine Spec | Class 4A – 5A (200 Pa) | EN 12208 / EN 12210 (Class C4/B4) |
| Acoustic Attenuation (Rw) | Up to 44 dB Sound Reduction Index (laminated acoustic interlayer) | 28 – 32 dB | EN ISO 717-1 (Tram & River Logistics Damping) |
| Motorization & Safety Redundancy | 24V DC Brushless Dual Synchronous Motors, Optical Obstacle Sensing | Single AC Tubular Motor, Basic Limit Switch | EN 60335-2-103 / CE Machinery Directive 2006/42/EC |
| Surface Protection & Corrosion | Qualicoat Class 2 Architectural Powder Coating (AAMA 2604/2605) | Standard Anodized / Thin Anodic Film | ISO 9227 Neutral Salt Spray > 1,500 Hours |
Xi'an Orion Architectural Glass & Window Co., Ltd. operates state-of-the-art automated machining centers ensuring micron-level assembly tolerances for international architectural exports.
Xi'an Orion Architectural Glass & Window Co., Ltd. applies zero-defect methodology with dedicated ISO-certified batch sampling, optical glass flaw detection, and salt spray corrosion testing across all manufacturing cycles.
Registered in 2017 with 9 years of deep fabrication experience, 6 years of international operations, and an annual export value exceeding $21 million, Orion bridges tier-1 supply networks with Swiss architectural execution.
We source raw float glass from AGC and Saint-Gobain certified partners, extruded 6063/6060 aluminum billets from premium smelters, and German Siegenia/G-U hardware mechanisms, ensuring guaranteed material consistency and traceable metallurgical batch certificates.
Our dedicated R&D wing of 36 mechanical and structural engineers continuously patents high-performance sash profiles, integrated hidden counterweight balances, anti-pinch infrared safety curtains, and embedded IoT controllers designed for high-end residential and commercial facades.
Full multimodal container handling from factory floor to Basel ports and road freight depots via Rotterdam/Antwerp or multimodal rail. Units are packed in export-grade steel A-frames, vapor-barrier desiccants, and shock-monitoring sensors to protect delicate motor and glass assemblies during transit.
Explore our certified automated vertical sliding guillotine configurations, engineered for commercial balconies, high-end penthouses, corporate offices, and modern public facilities.
Designed for historical building restorations in Basel Altstadt with slim sightlines and customized historic RAL architectural paint finishes.
High-attenuation acoustic design for urban zones near Basel SBB and industrial rail intersections. Sound insulation tested up to 43dB.
Lower pane acts as a fixed certified structural glass safety balustrade, while upper motorized panes slide vertically for fresh airflow.
Equipped with 44mm triple-glazed argon cavity and aero-gel filled thermal profiles delivering market-leading thermal efficiency.
Transforms restaurant store fronts in seconds with smooth, silent vertical opening speeds up to 120 mm/s, maximizing street dining engagement.
Flush-fit frameless interior aesthetic with pharmaceutical-grade silicone gaskets and chemical-resistant powder coated chassis.
Single sash spans up to 4.2 meters width with steel counter-weights and heavy-duty timing belts engineered for over 50,000 continuous cycles.
Integrated automatic rain, wind, and CO2 ventilation sensors that dynamically open or seal the window to optimize passive natural cooling.
Continuous innovation developed by our 36-engineer R&D department to address evolving Swiss building efficiency codes and digital facility requirements.
Developing semi-transparent photovoltaic glazing within the upper fixed or lower guillotine panes to generate decentralized solar power while preserving daylighting standards required by Swiss Cantonal energy guidelines.
Integrating switchable electrochromic technology into electric lifting glass assemblies. Operators can control solar heat gain coefficient (SHGC) from 0.40 down to 0.09 at the push of a button without external venetian blinds.
Next-generation brushless motor drives feature internal vibration, torque, and cycle sensors that stream real-time telemetry to the building management software, flagging micro-alignment issues before friction wear occurs.
Comprehensive engineering clarifications for facade consultants, general contractors, and procurement managers in Basel and Western Europe.
Our motorized lifting systems achieve whole-window U-values (Uw) down to 0.78 W/(m²·K) by integrating polyamide 66 thermal barrier struts (PA66 GF25), high-performance argon-filled triple insulating glazing, and Swiss-specified warm-edge spacers (Swisspacer Ultimate). The air-barrier construction meets Class 4 according to EN 12207, which fully satisfies the airtightness prerequisites of Minergie and Minergie-P certifications.
All Orion motorized vertical guillotine windows are engineered with quadruple redundancy: (1) Dual automotive-grade high-tensile steel cables or heavy-duty Kevlar timing belts; (2) Mechanical spring-loaded parachute arrestor cams that physically lock into the vertical side track within 0.05 seconds if line tension drops; (3) Contact-free infrared optical light curtains spanning the entire closing perimeter; (4) Electronic current-sensing collision detection that immediately reverses motor travel upon encountering resistance exceeding 15 Newtons.
Yes. We supply digital motor controllers equipped with dry contact interfaces, RS485 Modbus, and native protocol bridge options for KNX, BACnet, and Somfy animeo systems. This allows facility operators in Basel commercial complexes to configure automated night cooling flushes, synchronized rain-close protocols, and room occupancy schedules via central building control.
Standard fabrication lead time is 25 to 35 working days post shop-drawing signoff. Freight is dispatched via sealed 20GP/40HQ shipping containers through Rotterdam or Antwerp, followed by bonded overland transit to Basel customs depots (Rheinhafen or Weil am Rhein customs hubs). Full DDP (Delivered Duty Paid) coordination, including Swiss import VAT clearing, can be arranged through our freight forwarding partners.
We provide comprehensive English/German 3D installation BIM models (Revit/IFC), detailed wiring schematics, video installation walkthroughs, and factory-pre-assembled frame modularity. All electrical sub-assemblies are pre-wired and bench-tested prior to crating, minimizing on-site mechanical troubleshooting for Swiss facade erectors.
Connect with Xi'an Orion's fenestration engineering desk for complete tender reviews, thermal simulation reports, structural wind-load calculations, and competitive direct-factory pricing.
Orion Window & Door